Description:
Don't want to cut the wiring on your D5 to add accessories? Our Evolution D5 BA PowerPlate® provides a simple plug and play harness and bolt-on installation that makes it easy to add 12 volt accessories to your vehicle and do so properly with a marine grade fuse panel and a large surface area to mount your led controller, amplifier, and whatever else you might have up your sleeve.
The Evolution D5 has a 48volt to 12volt reducer which powers the factory 12v components on the cart (touchscreen, lighting, soundbar), but the only way to tie into that converter is if you cut the wiring, and crimp or solder your own wiring to the converter. Well, most golf cart owners don't really don't want to cut any wires on their your cart, so we developed the D5 BA PowerPlate® which requires no cutting, and simply plugs right into the converter, providing you with a simple, quick, and safe solution to a 12 volt, marine fuse block!
Key Features:
Plug N Play Design. Don't risk shorting your converter/accessories out by trying to cut and crimp onto your D5s factory wiring. The D5 BA PowerPlate® features a plug n play weather protected harness that is prewired to a marine grade fuse panel and plugs right in to the 12volt converter on your D5. So not only is it easy to install, it's also safe!
Simple & Sexy. You might not think wiring can be considered "sexy" but we at BA Carts are wiring nerds, so when we see a beautiful panel like the D5 PowerPlate that is good looking, easy to install, and hides all of the accessory wiring t'boot, we get a little excited and you should to because quality wiring is safe wiring!
Quick Installation. Bolt it down, plug it in, wire your accessories to the fuse panel. Done. Can it get any easier?
No Drilling, Wire Cutting, Or Screwing. The plate bolts to pre existing holes on the equipment panel under the rear seat, and the fuse panel plugs into the 12volt converter, so there's no need to drill mounting holes, or cut wires to install it, or screws to screw the plate down.
We Upgrade The Wiring! The factory 12 volt wiring harness that powers your touchscreen, usb charger, and lighting, does not have a fuse. So if any of those items short out, you run a risk of frying your converter. However, with our Powerplate, we fuse the wiring to the dash, so now if any of those items short out, you'll blow the fuse, instead of your converter.
10 Gauge Wiring Harness. Now that it is easy to add accessories like an LED Light Bar, an amplifier, etc, you're going to draw quite a bit of amperage from your 12volt converter on your D5, and when you're drawing higher amperage, a heavier gauge wire is required. The D5 PowerPlate's wiring harness has 10 gauge wire for ground and for power, which is rated for a 20 amp draw (the max amperage provided by the converter on your D5).
Easy Access. Mounted right below your rear seat with the fuse panel facing up, our PowerPlate could not be installed in a better place to make it easier for you to check your fuses!
Craftsmanship. We are perfectionist with over 100 years of audio experience and we love wiring just as much as we love golf carts, so you can expect the highest level of craftsmanship when it comes to our wiring, product design, and overall fit and finish.
Customer Service. We created and manufacture the D5 BA PowerPlate® in house, so guess who you get to talk to when you have a question or concern? You guessed it. Us. Our service to customers is just as important to us as our craftsmanship is in our products, so when you need a question answered, reach out to us via text, phone, or email and we will make sure you are taken of.
ADD ON OPTION: The Marine Wiring Kit
Is The D5 PowerPlate® Made For You?
Fits:
* This PowerPlate is specifically built for the D5 model. If you have a D2 model (Plus, Pro, Carrier, Forester), then go to our D2 accessory section here on our online store and you'll find the D2 PowerPlate as well as many other accessories!
- Six Terminal Marine Fuse Block
- Wiring Terminal Crimps
- Fuses (5, 10, and 20)
- Marine Wiring Kit (If Chosen) (Marine Grade Work Box with (2) snap grommets and (2) wire glands
Written digital Instructions are included in the confirmation email after the item is ordered
View written instructions here
Watch installation video here
Warranty:
1 Year Warranty
Disclaimer:
We are not liable for any bodily injury or property damage during or after installation of our products.
Return & Refund Policy:
A refund will be issued for a returned item if:
The total amount refunded to the customer will be:
*Refund does not include freight cost and credit card transaction fees. If you return the item you will be refunded less the freight and transaction fees.
*We do not reimburse for package theft! If the carrier states that your package was delivered but it's stolen off your property, we are not legally obligated to reimburse you
Questions? Please email us at bacartsvw@gmail.com, call us at 419 238 4345, or text us at 567 208 0186
Discounted dealer/bulk pricing available! Please contact us if interested! 419 238 4345 or sloan@bacarts.com
Install Level: Beginner
